TH-7300H
High-pressure hydrogen generator is a compact device. It uses the technology of proton exchange membrane (PEM) water electrolysis to produce hydrogen and directly electrolyzes ultra-pure water without a booster pump. After multi-stage drying, high pressure and high purity hydrogen is obtained. The generator has built-in dual parallel electrical systems with each system operating independently, which is safe and reliable.
Electrolysis of water to produce hydrogen, which can be produced when needed.The purity of hydrogen can reach 99.999%.
With its maximum working pressure as 10 MPa, it can replace the high-pressure hydrogen cylinder in the laboratory.
According to the experimental requirements, the pressure upper limit can be adjusted to prolong the life of the electrolytic cell.
Non-touch high sensitivity liquid level detection can turn on the water shortage alarm and avoid damage to the electroytic cellcaused by low water level.
If hydrogen leaks, the built-in high sensitivity hydrogen sensor is turned on and the software prompts an alarm with a buzzing sound.
Model | TH-7300H | |
Hydrogen Purity | 99.99% | |
Hydrogen Flow Rate | 0-300 mL/min | |
Outlet Pressure | < 7 MPa | |
Water Loading Capacity | 0.5-1.6 L | |
Water Quantity | Deionized water/double distilled water with a conductivity ≤ 0.2 μS/cm | |
Power Supply | 220 V±10%, 50 Hz | |
Power | 160 W | |
Dimension (DxWxH, mm) | 420x260x440 |
Automatic Continuous Hydrogenation Platform
More InfoAutomatic Continuous Hydrogenation Platform
More InfoSemi-Automatic Continuous Hydrogenation Platform
More InfoHigh-Pressure Hydrogen Generator
More InfoHigh-Pressure Hydrogen Generator
More InfoHigh-Pressure Hydrogen Generator
More InfoHigh-Pressure Hydrogen Generator
More InfoHigh-Pressure Hydrogen Generator
More Info© Copyright 2024 FlowlabTech . All Rights Reserved.